Research Article
BibTex RIS Cite
Year 2018, Volume: 2 Issue: 2, 1 - 9, 28.12.2018

Abstract

References

  • [1] Hossain, E., Tur, M. R., Sanjeevaikumar, P., Ay, S. & Khan, I., (2018). “Analysis and Mitigation of Power Quality Issues in Distributed Generation Systems Using Custom Power Devices”, IEEE Access, vol.6 pp.16816-16833, DOI:10.1109/ACCESS.2018.2814981. [2] Daehler P. ve Affolter, R. (2000) “Requirements and Solutions for Dynamic Voltage Restorer, Case Study,” IEEE Power Engineering Society Meeting, pp. 2881-2885. [3] Roger D. C., Mark McGranaghan F., Surya S., ve Wayne Beaty H., (2003) Electrical Power Systems Quality, 2nd Edition, New York, McGraw-Hill, , pp. 528. [4] Ravindra, S., Veera Reddy, V.C., Sivanagaraju, S. and Gireesh Kumar, D. (2012) Design of Shunt Active Power Filter to Eliminate the Harmonic Currents and to Compensate the Reactive Power under Distorted and or Imbalanced Source Voltages in Steady State. International Journal of Engineering Trends and Technology, 3, 1-6. [5] Ken D., ve Hedman H., (2005) “The Role of Distributed Generation in Power Quality and Reliability: Final Report,” Energy and Environmental Analysis. [6] Kumar, A. and Singh, J. (2013 Harmonic Mitigation and Power Quality Improvement Using Shunt Active Power Filter. International Journal of Electrical, Electronics and Mechanical Control, 2, 13 p. [7] Singh, M., Khadkikar, V., Chandra, A. and Varma, R.K. (2011) Grid Interconnection of Renewable Energy Sources at the Distribution Level With Power-Quality Improvement Features. IEEE Transactions on Power Delivery, 26, 307- 315. [8] E. Blondel and C. Monney, "Efficient powering of communication and IT equipments using rotating UPS," in Telecommunications Energy Conference (INTELEC), 32nd International, 2010, pp. 1-5. [9] S. T. Chavhan, C. Bhattar, P. V. Koli, and V. S. Rathod, "Application of STATCOM for power quality improvement of grid integrated wind mill," in Intelligent Systems and Control (ISCO), 2015 IEEE 9th International Conference on, 2015, pp. 1-7. [10] K. Ilango, A. Bhargav, A. Trivikram, P. Kavya, G. Mounika, and M. G. Nair, "Power quality improvement using STATCOM with renewable energy sources," in Power Electronics (IICPE), 2012 IEEE 5th India International Conference on, 2012, pp. 1-6. [11] R. Bhavani, N. R. Prabha, and C. Kanmani, "Fuzzy controlled UPQC for power quality enhancement in a DFIG based grid connected wind power system," in Circuit, Power and Computing Technologies (ICCPCT), 2015 International Conference on, 2015, pp. 1-7. [12] V. Khadkikar, "Enhancing electric power quality using UPQC: A comprehensive overview," IEEE transactions on Power Electronics, vol. 27, pp. 2284-2297, 2012. [13] A. Honrubia-Escribano, T. García-Sánchez, E. Gómez-Lázaro, E. Muljadi, and A. Molina-Garcia, "Power quality surveys of photovoltaic power plants: characterisation and analysis of grid-code requirements," IET Renewable Power Generation, vol. 9, pp. 466-473, 2015. [14] M. Kesler and E. Ozdemir, "Synchronous-reference-frame-based control method for UPQC under unbalanced and distorted load conditions," IEEE transactions on industrial electronics, vol. 58, pp. 3967-3975, 2011. [15] D. Graovac, V. Katic, and A. Rufer, "Power quality problems compensation with universal power quality conditioning system," IEEE Transactions on Power Delivery, vol. 22, pp. 968-976, 2007. [16] E. Styvaktakis, M. H. Bollen, and I. Y. Gu, "Classification of power system events: Voltage dips," in Harmonics and Quality of Power, 2000. Proceedings. Ninth International Conference on, 2000, pp. 745-750. [17] N. Edomah, "Effects of voltage sags, swell and other disturbances on electrical equipment and their economic implications," in IEEE Proc. of 20th International Conference on Electricity Distribution, 2009. [18] R. Thallam and G. Heydt, "Power acceptability and voltage sag indices in the three-phase sense," in Power Engineering Society Summer Meeting, 2000. IEEE, 2000, pp. 905-910. [19] C.-I. Chen, Y.-C. Chen, and C.-N. Chen, "A high-resolution technique for flicker measurement in power quality monitoring," in Industrial Electronics and Applications (ICIEA), 2013 8th IEEE Conference on, 2013, pp. 528-533. [20] Shailesh M. Deshmukh1, Bharti Dewani, S. P. Gawande, A review of Power Quality Problems-Voltage Sags for Different Faults. International Journal of Scientific Engineering and Technology, Volume No.2, Issue No.5, pp. 392-3971, 2013. [21] Steven Warren Blume, Electric power system basics: for the nonelectrical professional. John Wiley & Sons, pp. 199,2007 [22] Bollen, M. , “Understanding Power Quality Problems – Voltage Sags and Interruptions”, IEEE Press Series on Power Engineering – John Wiley and Sons, Piscataway, USA (2000). [23] Delgado, J., “Gestão da Qualidade Total Aplicada ao Sector do Fornecimento da Energia Eléctrica”, Thesis submitted to fulfilment of the requirements for the degree of PhD. in Electrotechnical Engineering, Coimbra, September 2002. [24] Suzette Albert, “Total Power Quality Solution Approach for Industrial Electrical Reliability”, August 2006 issue of Power Quality World.

Solution Methods and Recommendations for Power Quality Analysis in Power Systems

Year 2018, Volume: 2 Issue: 2, 1 - 9, 28.12.2018

Abstract

Power quality means to maintain or compensate
the nominal size and frequency of the near sinusoidal nominal voltage and
current of the power system. As an undesirable condition in the power quality,
the energy loss leads to a decrease in the efficiency of the system and the
failure in sustainability in energy. In most cases, the control of the power
quality means that the voltage is controlled, ie, the frequency balance. This
is because in most cases the tension can be more easily controlled from the
current. More specifically, power quality can be explained by some parameters
such as continuity of service, change of voltage magnitude in transient
voltages and currents, and harmonic content. To define the importance of power
quality problems, we can say that poor power quality leads to unnecessary power
and economic waste. This also directly affects the risk of reliability in
energy. In addition, it creates a financial burden for suppliers and consumers.
Unstable voltage and frequency often create problems with the power flow in the
transmission line. Several methods are used to solve basic power quality
problems. In this study, energy quality solution methods, especially reserve
requirements, have been examined and solution suggestions are presented.

References

  • [1] Hossain, E., Tur, M. R., Sanjeevaikumar, P., Ay, S. & Khan, I., (2018). “Analysis and Mitigation of Power Quality Issues in Distributed Generation Systems Using Custom Power Devices”, IEEE Access, vol.6 pp.16816-16833, DOI:10.1109/ACCESS.2018.2814981. [2] Daehler P. ve Affolter, R. (2000) “Requirements and Solutions for Dynamic Voltage Restorer, Case Study,” IEEE Power Engineering Society Meeting, pp. 2881-2885. [3] Roger D. C., Mark McGranaghan F., Surya S., ve Wayne Beaty H., (2003) Electrical Power Systems Quality, 2nd Edition, New York, McGraw-Hill, , pp. 528. [4] Ravindra, S., Veera Reddy, V.C., Sivanagaraju, S. and Gireesh Kumar, D. (2012) Design of Shunt Active Power Filter to Eliminate the Harmonic Currents and to Compensate the Reactive Power under Distorted and or Imbalanced Source Voltages in Steady State. International Journal of Engineering Trends and Technology, 3, 1-6. [5] Ken D., ve Hedman H., (2005) “The Role of Distributed Generation in Power Quality and Reliability: Final Report,” Energy and Environmental Analysis. [6] Kumar, A. and Singh, J. (2013 Harmonic Mitigation and Power Quality Improvement Using Shunt Active Power Filter. International Journal of Electrical, Electronics and Mechanical Control, 2, 13 p. [7] Singh, M., Khadkikar, V., Chandra, A. and Varma, R.K. (2011) Grid Interconnection of Renewable Energy Sources at the Distribution Level With Power-Quality Improvement Features. IEEE Transactions on Power Delivery, 26, 307- 315. [8] E. Blondel and C. Monney, "Efficient powering of communication and IT equipments using rotating UPS," in Telecommunications Energy Conference (INTELEC), 32nd International, 2010, pp. 1-5. [9] S. T. Chavhan, C. Bhattar, P. V. Koli, and V. S. Rathod, "Application of STATCOM for power quality improvement of grid integrated wind mill," in Intelligent Systems and Control (ISCO), 2015 IEEE 9th International Conference on, 2015, pp. 1-7. [10] K. Ilango, A. Bhargav, A. Trivikram, P. Kavya, G. Mounika, and M. G. Nair, "Power quality improvement using STATCOM with renewable energy sources," in Power Electronics (IICPE), 2012 IEEE 5th India International Conference on, 2012, pp. 1-6. [11] R. Bhavani, N. R. Prabha, and C. Kanmani, "Fuzzy controlled UPQC for power quality enhancement in a DFIG based grid connected wind power system," in Circuit, Power and Computing Technologies (ICCPCT), 2015 International Conference on, 2015, pp. 1-7. [12] V. Khadkikar, "Enhancing electric power quality using UPQC: A comprehensive overview," IEEE transactions on Power Electronics, vol. 27, pp. 2284-2297, 2012. [13] A. Honrubia-Escribano, T. García-Sánchez, E. Gómez-Lázaro, E. Muljadi, and A. Molina-Garcia, "Power quality surveys of photovoltaic power plants: characterisation and analysis of grid-code requirements," IET Renewable Power Generation, vol. 9, pp. 466-473, 2015. [14] M. Kesler and E. Ozdemir, "Synchronous-reference-frame-based control method for UPQC under unbalanced and distorted load conditions," IEEE transactions on industrial electronics, vol. 58, pp. 3967-3975, 2011. [15] D. Graovac, V. Katic, and A. Rufer, "Power quality problems compensation with universal power quality conditioning system," IEEE Transactions on Power Delivery, vol. 22, pp. 968-976, 2007. [16] E. Styvaktakis, M. H. Bollen, and I. Y. Gu, "Classification of power system events: Voltage dips," in Harmonics and Quality of Power, 2000. Proceedings. Ninth International Conference on, 2000, pp. 745-750. [17] N. Edomah, "Effects of voltage sags, swell and other disturbances on electrical equipment and their economic implications," in IEEE Proc. of 20th International Conference on Electricity Distribution, 2009. [18] R. Thallam and G. Heydt, "Power acceptability and voltage sag indices in the three-phase sense," in Power Engineering Society Summer Meeting, 2000. IEEE, 2000, pp. 905-910. [19] C.-I. Chen, Y.-C. Chen, and C.-N. Chen, "A high-resolution technique for flicker measurement in power quality monitoring," in Industrial Electronics and Applications (ICIEA), 2013 8th IEEE Conference on, 2013, pp. 528-533. [20] Shailesh M. Deshmukh1, Bharti Dewani, S. P. Gawande, A review of Power Quality Problems-Voltage Sags for Different Faults. International Journal of Scientific Engineering and Technology, Volume No.2, Issue No.5, pp. 392-3971, 2013. [21] Steven Warren Blume, Electric power system basics: for the nonelectrical professional. John Wiley & Sons, pp. 199,2007 [22] Bollen, M. , “Understanding Power Quality Problems – Voltage Sags and Interruptions”, IEEE Press Series on Power Engineering – John Wiley and Sons, Piscataway, USA (2000). [23] Delgado, J., “Gestão da Qualidade Total Aplicada ao Sector do Fornecimento da Energia Eléctrica”, Thesis submitted to fulfilment of the requirements for the degree of PhD. in Electrotechnical Engineering, Coimbra, September 2002. [24] Suzette Albert, “Total Power Quality Solution Approach for Industrial Electrical Reliability”, August 2006 issue of Power Quality World.
There are 1 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Articles
Authors

Mehmet Rıda Tür 0000-0001-5688-4624

Publication Date December 28, 2018
Published in Issue Year 2018 Volume: 2 Issue: 2

Cite

APA Tür, M. R. (2018). Solution Methods and Recommendations for Power Quality Analysis in Power Systems. Journal of Engineering and Technology, 2(2), 1-9.