Abstract
In this study, the electrical and constructional improvement of the horizontal dilatation module used to compensate the mechanical stresses on the horizontal line system caused by the elongation of the materials in the busbar system due to the effect of heat energy is discussed. Dilatation modules contain materials that have the ability to stretch in order to take the mechanical stresses of busbar systems. These stretchable materials must also transmit electric current without interruption. The main objective of the study is to increase energy efficiency by minimizing losses. The difference from the dilatation modules used today is that it is made without the use of additional materials in the part of the module that provides electrical conduction in the module that provides flexibility.
References
- IEC 61439-6 standardı Alçak gerilim anahtarlama ve kontrol düzeni donanımları- Bölüm 6: Genel şebekelerdeki güç dağıtımı için donanımlar
- Burali YN., Patil MB. Paper on basbar trunking system for electrical supply to ındustrial & commercial ınstallation. IOSR Journal of Engineering (IOSRJEN) 2014; 4(01): 01-12
- Demirol YB., Cinar MA., Alboyaci B. Evaluation of cable and busbar system in multiconductor distribution systems interms of current and magnetic field distributions. Turkish Journal of Electrical Engineering and Computer Sciences 2021; 29(7): 3119-3132.
- Kaçar R., Emre HE., Demir H., Gündüz S. Al-Cu-Al malzeme çiftinin sürtünme karıştırma nokta kaynak kabiliyeti. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 2011; 26(2): 349-357.
- Kalane SP., Bobade CM. Comparative analysis of electrical parameters for three phase busbar trunking system. International Journal of Scientific Research in Scienceand Technology 2018; 4(5): 1698-1709.
- Kumar RD., Pagar DD., Menezes PL., Eyvazian A. Friction-based welding processes: friction welding and friction stir welding. Journal of Adhesion Science and Technology 2020; 34(24): 2613-2637.
- Mypati O., Anwaar T., Mitra D., Pal SK., Srirangam P. Characterization and modelling of Al and Cu busbar during charging and discharging of Li-ion battery for electric vehicles. Applied Thermal Engineering 2023; 218: 119239.
- Tzeneva R., Slavtchev Y., Mladenoz V. Bolted busbar connections with slotted bolt holes. WSEAS Transactions on Circuits and Systems 2006; 7: 1021-1027.
- Tzeneva R., Slavtchev Y., Mastorakis N., Mladenov V. Bolted busbar connections with longitudinal slots. In Proceedings of the 14th WSEAS International Conference on CIRCUITS (Part of the 14th WSEAS CSCC Multiconference), 23-25 Temmuz 2010, sayfa no:22-24, Corfu Island Greece.
- URL-1. https://www.eae.com.tr/busbar-genel-bilgi, Erişim Tarihi: 15 Mart 2023.
- URL-ttps://portal.turkpatent.gov.tr/anonim/arastirma/patent/sonuc/dosya?patentAppNo=2022/012342 &documentsTpye=all, Erişim Tarihi: 15 Mart 2023.
- Zhang JG. Effect of dust contamination on electrical contact failure. Electrical Contacts-2007 Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts. 16-19 September 2007, sayfa no:xxi-xxx, Pittsburgh, PA, USA.
Abstract
Bu çalışmada ısı enerjisi etkisiyle busbar sisteminde bulunan malzemelerin uzamasının yatay hat sistemi üzerinde oluşturduğu mekanik gerilmeleri dengelemek için kullanılan yatay dilatasyon modülünün elektriksel ve konstrüksiyon olarak iyileştirilmesi ele alınmıştır. Dilatasyon modülleri busbar sistemlerinin mekanik gerilmelerini almak için içerisinde esneme kabiliyeti bulunan malzemeler bulundurur. Esneme kabiliyeti olan bu malzemeler aynı zamanda kesintisiz olarak elektrik akımını da iletmelidir. Çalışmadaki temel amaç kayıpları en aza indirerek enerji verimliliğini arttırmaktır. Günümüzde kullanılan dilatasyon modüllerinden farkı esnekliği sağlayan modülün içerisindeki elektrik iletimi sağlayan bölümde ilave malzeme kullanılmadan yapılmasıdır.
Thanks
Çalışmaya katkılarından dolayı EAE Elektrik, Asansör Sanayi, İnşaat, Sanayi ve Ticaret A.Ş.'ye teşekkür ederiz.
References
- IEC 61439-6 standardı Alçak gerilim anahtarlama ve kontrol düzeni donanımları- Bölüm 6: Genel şebekelerdeki güç dağıtımı için donanımlar
- Burali YN., Patil MB. Paper on basbar trunking system for electrical supply to ındustrial & commercial ınstallation. IOSR Journal of Engineering (IOSRJEN) 2014; 4(01): 01-12
- Demirol YB., Cinar MA., Alboyaci B. Evaluation of cable and busbar system in multiconductor distribution systems interms of current and magnetic field distributions. Turkish Journal of Electrical Engineering and Computer Sciences 2021; 29(7): 3119-3132.
- Kaçar R., Emre HE., Demir H., Gündüz S. Al-Cu-Al malzeme çiftinin sürtünme karıştırma nokta kaynak kabiliyeti. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 2011; 26(2): 349-357.
- Kalane SP., Bobade CM. Comparative analysis of electrical parameters for three phase busbar trunking system. International Journal of Scientific Research in Scienceand Technology 2018; 4(5): 1698-1709.
- Kumar RD., Pagar DD., Menezes PL., Eyvazian A. Friction-based welding processes: friction welding and friction stir welding. Journal of Adhesion Science and Technology 2020; 34(24): 2613-2637.
- Mypati O., Anwaar T., Mitra D., Pal SK., Srirangam P. Characterization and modelling of Al and Cu busbar during charging and discharging of Li-ion battery for electric vehicles. Applied Thermal Engineering 2023; 218: 119239.
- Tzeneva R., Slavtchev Y., Mladenoz V. Bolted busbar connections with slotted bolt holes. WSEAS Transactions on Circuits and Systems 2006; 7: 1021-1027.
- Tzeneva R., Slavtchev Y., Mastorakis N., Mladenov V. Bolted busbar connections with longitudinal slots. In Proceedings of the 14th WSEAS International Conference on CIRCUITS (Part of the 14th WSEAS CSCC Multiconference), 23-25 Temmuz 2010, sayfa no:22-24, Corfu Island Greece.
- URL-1. https://www.eae.com.tr/busbar-genel-bilgi, Erişim Tarihi: 15 Mart 2023.
- URL-ttps://portal.turkpatent.gov.tr/anonim/arastirma/patent/sonuc/dosya?patentAppNo=2022/012342 &documentsTpye=all, Erişim Tarihi: 15 Mart 2023.
- Zhang JG. Effect of dust contamination on electrical contact failure. Electrical Contacts-2007 Proceedings of the 53rd IEEE Holm Conference on Electrical Contacts. 16-19 September 2007, sayfa no:xxi-xxx, Pittsburgh, PA, USA.
Details
| Primary Language | Turkish |
|---|---|
| Subjects | Machine Tools |
| Journal Section | RESEARCH ARTICLES |
| Authors | |
| Publication Date | December 20, 2023 |
| Submission Date | September 5, 2023 |
| Acceptance Date | October 27, 2023 |
| Published in Issue | Year 2023 Volume: 6 Issue: Ek Sayı |
Cite
*This journal is an international refereed journal
*Our journal does not charge any article processing fees over publication process.
* This journal is online publishes 5 issues per year (January, March, June, September, December)
*This journal published in Turkish and English as open access.
* This work is licensed under a Creative Commons Attribution 4.0 International License.