Bu çalışmada, EUROCODE 5 kapsamına alınan yerli iğne yapraklı ağaç türlerinden uludağ göknarı ve karaçam keresteleri ve polivinil asetat (PVAc) tutkalı kullanılarak elde edilen çapraz lamine keresteler (ÇLK) malzemesinin eğilme direnci ve elastikiyet modülü incelenmiştir. 3 katmalı olarak hazırlanan ÇLK’lar 0.4 N/mm2 basınç altında 35°C sıcaklıkta 150 dk süre ile preslenmiştir. Üç nokta eğme deneyi yük-deformasyon eğrileri elde edilen hem masif Uludağ göknarı ve karaçam hem de bu malzemelerden elde edilen ÇLK’ların eğilme direnci ve elastikiyet modülü belirlenmiştir. Masif Uludağ göknarı ve karaçamın eğilme direnci 65 N/mm2 ve 83.8 N/mm2 olarak tespit edilmiştir. Bu malzemelerden elde edilen ÇLK’ların eğilme direnci ise 38.4 N/mm2 ve 64.6 N/mm2 olarak bulunmuştur. Elastikiyet modülünde ise bu değerler sırasıyla, 9093.5 N/mm2, 11068.8 N/mm2, 5273.4 N/mm2 ve 8657.0 N/mm2 olarak belirlenmiştir. Deney sonuçlarına göre karaçam odunundan elde edilen hem masif hem de ÇLK’lar göknar odunundan elde edilenlere göre daha dayanıklı olarak bulunmuştur. Çalışmanın varyans analizi de hem masif hem de ÇLK için odun türünün istatiksel olarak anlamlı bir farklılık gösterdiğini ortaya koymuştur. Sonuç olarak, yerli iğne yapraklı ağaçlarımızın EUROCODE 5 kapsamında alınması, bu malzemelerden ÇLK’ların üretilmesi ve malzemelerin mekanik özelliklerinin belirlenmesi Türkiye ahşap yapı sektöründe bu malzemelerin yapı analizinde ve yapı eleman tasarımında önemlidir.
In this study, flexural strength and modulus of elasticity (MOE) of cross-laminated timber (CLT) made of the Uludag fir and black pine wood, which are domestic coniferous tree species included in the scope of the EUROCODE 5, and polyvinyl acetate (PVAc) adhesive were investigated. CLTs, prepared with three layers, were pressed under the pressure of 0.4 N/mm2, the temperature of 35°C and the time of 150 min. Three-point bending tests were applied to determine flexural strength and MOE by obtaining load-deformation curves of solid wood and CLTs made of the Uludag fir and black pine wood. The average flexural strength of the solid Uludag fir and black pine was 65 N/mm2 and 83.8 N/mm2. The average flexural strength of the CLTs made of the Uludag fir and black pine wood was 38.4 N/mm2 and 64.6 N/mm2, respectively. Those of MOEs were 9093.5 N/mm2, 11068.8 N/mm2, 5273.4 N/mm2 and 8657.0 N/mm2, respectively. It resulted that solid wood and CLT made of black pine wood had more strength than those of Uludag fir. Analysis of variance also showed that wood species have a statistically significant effect on flexural strength and MOE of the materials. Consequently, the acquisition of domestic coniferous trees, the production of the CLTs made of these woods and the determination of their mechanical properties are vital in the structural analysis and member design of these materials in the wood construction industry in Turkey.
Cross laminated timbers Uludag fir Black pine Flexural strength Modulus of elasticity Çapraz lamine kirişler Uludağ göknarı Karaçam Eğilme Direnci Elastikiyet modülü
Primary Language | Turkish |
---|---|
Subjects | Engineering |
Journal Section | Orijinal Araştırma Makalesi |
Authors | |
Publication Date | December 29, 2022 |
Acceptance Date | November 2, 2022 |
Published in Issue | Year 2022 Volume: 23 Issue: 4 |