In this study, parameters affecting the thermal efficiency of heat pipes were optimized by the Taguchi method using different types of nanofluids in heat exchangers. The experimental design was carried out according to the L27(3^4) orthogonal series at three levels for four parameters affecting the thermal efficiency. The experiments were conducted for Aluminum Oxide (Al2O3), Titanium dioxide (TiO2) and Silicon dioxide (SiO2) at 0.2-0.4-0.6% concentrations. Isopropyl alcohol was used as base fluid in nanofluid suspensions. The inlet temperatures in the evaporator region were determined as 40-60-80°C, and the air velocities in the condenser region were determined as 0.4-0.8-1.2m/s. As a result of the experiments the thermal efficiencies of the heat pipes were calculated. The model’s accuracy of the model was tested by analysis of variance (ANOVA) and optimum parameters were determined as nanoparticle SiO2, concentration 0.4, evaporator inlet temperature 80°C and air velocity in the condenser 1.2m/s.
AÇÜ BAP
2022.F90.02.04
Bu çalışmada ısı değiştiricilerinde farklı tip nanoakışkanlar kullanılarak ısı borularının termal verimini etkileyen parametreler Taguchi yöntemi ile optimize edilmiştir. Deney tasarımı termal verimi etkileyen dört parametre için üç seviyede L27(3^4) ortogonal serisine göre gerçekleştirilmiştir. Deneyler %0.2-0.4-0.6 derişimlerde, Alüminyum Oksit (Al2O3), Titanyum dioksit (TiO2) ve Silisyum dioksit (SiO2) için yapılmıştır. Nanoakışkan süspansiyonlarında temel sıvısı olarak izopropil alkol kullanılmıştır. Evaporatör bölgesindeki giriş sıcaklıkları 40-60-80°C, kondenser bölgesindeki hava hızları 0.4-0.8-1.2m/s olarak belirlenmiştir. Yapılan deneyler sonucunda ısı borularının ısıl verimleri hesaplanmıştır. Varyans analizi (ANOVA) ile modelin doğruluğu test edilmiş ve optimum parametreler; nanopartikül SiO2, derişim 0.4, evaporatör giriş sıcaklığı 80°C ve kondenserdeki hava hızı 1.2m/s olarak elde edilmiştir.
2022.F90.02.04
Birincil Dil | Türkçe |
---|---|
Konular | Mühendislik |
Bölüm | Mühendislik ve Mimarlık / Engineering and Architecture |
Yazarlar | |
Proje Numarası | 2022.F90.02.04 |
Yayımlanma Tarihi | 29 Aralık 2023 |
Gönderilme Tarihi | 26 Ocak 2023 |
Yayımlandığı Sayı | Yıl 2023 Cilt: 28 Sayı: 3 |